Bearings, V-belts & Power Transmission Equipment

Showing 73–84 of 20000 results

  • Acme Screw, Dia.625 In, Length 72 In

    $272.43

    In addition to acme flanges, Zoro carries acme nuts, acme threads, and a selection of lead screws. Here are some important details for Duff-Norton Acme Screw. Material: Steel, Length: 72.

  • Acme Screw, Dia.625 In, Length 72 In

    $248.10

    Acme Screw, Screw Dia .625 In, Lead .200 In, 1 Number of Starts, Length 72 In, Steel Material, For Use With Flange 5JDK5

  • Acme Screw, Dia.75 In, Length 36 In

    $121.99

    Zoro carries acme flanges of varying diameters to fit any acme screw. Take a look at the features for Duff-Norton Acme Screw. Material: Steel, Length: 36.

  • Acme Screw, Dia.75 In, Length 36 In

    $111.19

    Acme flanges are made for actuated linear motion systems to be used in conjunction with ACME screw systems. Here are some important details for Duff-Norton Acme Screw. Material: Steel, Length: 36.

  • Acme Screw, Dia.75 In, Length 72 In

    $314.04

    Acme Screw, Screw Dia .75 In, Lead .100 In, 1 Number of Starts, Length 72 In, Steel Material, For Use With Flange 5JDK6

  • Acme Screw, Dia.75 In, Length 72 In

    $254.18

    Acme flanges are useful due to the high torque created by linear motion that can loosen the connection between nut and screw. Here are some important details for Duff-Norton Acme Screw. Material: Steel, Length: 72.

  • Acme Threaded Collar, 1/2×10, 303 SS, OD 1 1/8

    $39.63

    Ruland acme threaded shaft collars are designed to provide more engagement, superior fit and holding power compared to standard threading.
    The clamp style design does not mar the shaft and is is easy to install and remove.
    Acme shaft collars are used for guiding, spacing, stopping, mounting, and component alignment.
    Bore 1/2 in – 10 TPI, OD 1 1/8 in, Width 0.406 in, 303 Stainless Steel, Screw #8-32, Wrench 9/64 in, Seating Torque 28 lb-in.

  • Acme Threaded Collar, 1/4×16, Steel

    $39.49

    Ruland acme threaded shaft collars are designed to provide more engagement, superior fit and holding power compared to standard threads.
    Ruland clamp style does not mar the shaft, is easy to install and remove.
    Acme shaft collars are used for guiding, spacing, stopping, mounting, and component alignment.
    Threaded Bore 1/4 in – 16 TPI, OD 5/8 in, Width 0.281 in, Black Oxide Steel, Screw #4-40, Wrench 3/32 in, Seating Torque 8 lb-in.

  • Acme Threaded Collar, 1/4×16, Steel

    $25.92

    Ruland acme threaded shaft collars are designed to provide more engagement, superior fit and holding power compared to standard threading.
    The clamp style design does not mar the shaft and is is easy to install and remove.
    Acme shaft collars are used for guiding, spacing, stopping, mounting, and component alignment.
    Bore 1/4 in – 16 TPI, OD 5/8 in, Width 0.281 in, Black Oxide Steel, Screw #4-40, Wrench 3/32 in, Seating Torque 15 lb-in.

  • Acme Threaded Collar, 1×10, Steel

    $35.88

    Ruland acme threaded shaft collars are designed to provide more engagement, superior fit and holding power compared to standard threading.
    The clamp style design does not mar the shaft and is is easy to install and remove.
    Acme shaft collars are used for guiding, spacing, stopping, mounting, and component alignment.
    Bore 1 in – 10 TPI, OD 1 3/4 in, Width 0.500 in, Black Oxide Steel, Screw 1/4 – 28, Wrench 3/16 in, Seating Torque 170 lb-in.

  • Acme Threaded Collar, 1×4, Steel

    $50.46

    Ruland acme threaded shaft collars are designed to provide more engagement, superior fit and holding power compared to standard threads.
    Ruland clamp style does not mar the shaft, is easy to install and remove.
    Acme shaft collars are used for guiding, spacing, stopping, mounting, and component alignment.
    Threaded Bore 1 in – 4 TPI, OD 1 3/4 in, Width 0.500 in, Black Oxide Steel, Screw 1/4 – 28, Wrench 3/16 in, Seating Torque 110 lb-in.

  • Acme Threaded Collar, 1×4, Steel

    $35.88

    Ruland acme threaded shaft collars are designed to provide more engagement, superior fit and holding power compared to standard threading.
    The clamp style design does not mar the shaft and is is easy to install and remove.
    Acme shaft collars are used for guiding, spacing, stopping, mounting, and component alignment.
    Bore 1 in – 4 TPI, OD 1 3/4 in, Width 0.500 in, Black Oxide Steel, Screw 1/4 – 28, Wrench 3/16 in, Seating Torque 170 lb-in.